P for platform - the model designation makes it clear that the loading area is absolutely level even over the turntable. Nevertheless, the loading height is only 900 mm. While a shovel or an excavator arm can be placed on a bend in the loading area without any problems on some construction machines, some other loads require the full length on one level. The two-axle ZTS 200P as well as the three-axle DTS 300P offer an 8,200 mm long drop deck, including rear cant. With a drop deck length of 9,500 mm, the four-axle VTS 400P can also safely accommodate particularly long loads. And particularly heavy ones too: thanks to a technically permissible axle load of 10,000 kg (permissible with special approval), the VTS 400P can shoulder loads of up to 30,100 kg. All three variants offer the robust 70 mm thick softwood floor in the drop deck, the area above the turntable and above the wheel housings is covered with steel chequer plate.

There is a choice of 10 stanchion pockets or ring lashing eyes with 5 t tensile force embedded in the drop deck. Always on board are 6 lashing points with 10 t tensile force each as well as 12 lashing mushrooms with 10 t tensile force each, which are recessed in the outer frame at the top and sides. Like the variants with a cranked loading area, the platform models also arrive with a one-piece, 2800 mm long hot-dip galvanised steel ramp, which is covered with wood; thanks to spring jack support, the ramps can be raised and lowered by hand. Multi-part ramps with different coverings and hydraulic actuation are available as options. The technical axle load for all three variants is 10,000 kg (permissible with special approval), the three-blade parabolic suspension with steel-rubber bearings and mechanical axle load compensation is maintenance-free, Fliegl offers a 15-year warranty here.